Hi friends! We’re sharing this pretty DIY wreath idea using leftover fabric and upcycled materials that’ll look great for Valentines Day but also throughout the year.
A Beautiful DIY Wreath using Scrap Fabric Hearts
Using the same sewn hearts from last year’s scrap fabric heart garland, I was able to reuse the pieces to make this pretty wreath for my front door. Although I don’t tend to go all out with Valentine’s Day decor, this DIY wreath made with scrap fabric hearts adds just the right amount of romance to the house. And who doesn’t like a bit of romance?
I’m really happy with the choice of fabrics! By using a muted floral silk patterned and pairing it with a rustic denim, this heart wreath is neutral enough that it will look great all year long. For your DIY wreath, try using fabrics that are non-seasonal to get the most use out of it.
From this Winter hat front door swag to this hand-lettered driftwood sign, we love making creative decor for the house. For other beautiful and unique nature-inspired front door decor ideas, check out these posts:
Materials Needed to Make a Fabric Heart Wreath:
- MDF Wreath Ring, size 16” diameter
- Printable Heart Templates in two sizes: small (4” high) and large (6” high)
- Denim fabric, approx. ¼ yard (enough to make 9 large and 9 small hearts)
- Pink Printed fabric, approx. ⅛ yard
- Fusible lining (if fabric is thin)
- Sewing Machine and matching thread
- Needle and matching thread
- Polyester fiber fill or stuffing
- 3 wood buttons
- Hot glue gun and clear glue sticks
- Americana Acrylics paint in Poodleskirt Pink (optional)
- Paintbrush
- Twine
How to Make a Pretty DIY Wreath:
Preparing the hoop
To start, paint the surface of the MDF hoop in pink and set it aside to dry. As it turns out, the hoops isn’t visible after the wreath is done so you can also skip this painting part if you like.
Sewing the Large Hearts
Cut out the fabric scraps into heart shapes using the large hearts template provided. For added interest, I cut one side in denim fabric and the other side in a colored silk. You could however stick with the same fabric for both sides.
Since the silk was light and flimsy compared with the denim, I added a lightweight fusing to the back side to help stiffen the silk and make it easier to sew with.
With the RIGHT sides of fabric together, sew the heart closed with a ¼” seam allowance from the edge. Continue all the way around leaving a 2” gap opening.
Clip the center of the heart as close to the stitch line as possible. Take care not to cut the stitches. This will help the fabric lay flat when it’s turned right side out.
Turn the stitched heart right side out. You can insert a pencil into the heart to smooth out the edges.
Lightly fill the heart with polyester batting.
Stitch the 2” opening closed by hand with a needle and matching thread color.
Repeat to make 9 hearts.
Sewing the Small Hearts
Cut out the fabric scraps into heart shapes using the small heart template provided.
With the WRONG sides of fabric together, sew the heart closed with a ¼” seam allowance from the edge. Continue all the way around leaving a 1.5” gap opening.
Lightly fill the heart with polyester batting.
Sew the opening closed with the sewing machine.
Repeat to make 9 hearts.
Assembling the Wreath
Start by laying out the large hearts on the wreath hoop until you are happy with the arrangement.
Next, glue each of the large hearts to the hoop with hot glue.
Then, lay out the small hearts over top of the large ones until you are happy with the arrangement. In addition to being decorative, the small hearts help to stabilize the larger ones on the ring.
Glue each of the small hearts onto the larger ones.
For added interest, add three wooden buttons onto the wreath.
Finally, tie some twine to the top of the wreath for hanging and enjoy!
If you enjoy sewing (like me!), then consider this DIY sewing apron pattern and sewn Christmas ornaments for some fun sewing projects.
This project originally appeared on Crafts by Amanda
Like it? Pin it for later!
DIY Wreath with Scrap Fabric Hearts
Jane and Sonja
Create a beautiful DIY Wreath using Scrap Fabric Hearts
5 from 1 vote
Print Instructions Pin Craft
Materials
- MDF Hoop size 16” diameter
- Americana Acrylics paint in Poodleskirt Pink
- Paintbrush
- Printable Heart Templates in two sizes: small 4” high and large (6” high)
- Denim fabric approx. ¼ yard (enough to make 9 large and 9 small hearts)
- Pink Printed fabric approx. ⅛ yard
- Fusible lining if fabric is thin
- Sewing Machine and matching thread
- Needle and matching thread
- Polyester Batting
- 3 wood buttons
- Hot glue gun and clear glue sticks
- Twine
Instructions
Paint the surface of the MDF hoop in pink. Set aside to dry.
Sewing the Large Hearts, cut out the fabric scraps into heart shapes.
With the RIGHT sides of fabric together, sew the heart closed with a ¼” seam allowance from the edge. Continue all the way around leaving a 2” gap opening.
Turn the stitched heart right side out and fill with polyester batting.
Stitch the 2” opening closed by hand with a needle and matching thread color.
Sewing the Small Hearts, cut out the fabric scraps into heart shapes.
With the WRONG sides of fabric together, sew the heart closed with a ¼” seam allowance from the edge. Continue all the way around leaving a 1.5” gap opening.
Lightly fill the heart with polyester batting and sew the opening closed.
To assemble the wreath, Start by laying out the large hearts on the wreath hoop and then glue each of the large hearts to the hoop with hot glue.
Glue each of the small hearts onto the larger ones.
Finally, tie some twine to the top of the wreath for hanging and enjoy!
Like this craft? Leave some stars!& mention @SustainMyCraftHabit or tag #sustainmycrafthabit on Instagram!
